Pressure Reg. |
This secion on tuning is writen by the users of the Turbo SS
site. |
| Cost:$109 w/ gauge |
| Metco Ajustable Fuel Pressure Regulator |
| Install: Takes about 1-2 hours. Removal of fuel rail and injectors from
the intake plenum is required. Not to big a deal but gets a little hairball if you never
done it before. Use a grinder to cut the outside of the old reg open then attach the Metco
peices to the half OEM reg. Reinstal fuel rails. Note: you will need a valve removal tool. You can get one at Target or Wallmart by the byclycles or automotive. If you dont your FPgauge wil read Zero. <I know cause iI did it. Doh!> |
| Back to: Tuning >>>> Technical >>>> Turbo SS Main |